|
中文版请点击这里
Your FPD China Team
Should you have further questions, please contact a FPD China team member listed below.
Exhibiting & Sponsorship
Ms. Eileen Xiao
Tel: +86.21.6027.8525
Email: [email protected]
Show Preparation
(Booth Construction, Freight Handling, Exhibitors Registration, etc)
Mr. Azir Xiang
Tel: +86.21.6027.8536
Email: [email protected]
Mr. Ryan Cai
Tel: +86.21.6027.8520
Email: [email protected]
|
|
|
|
★The exhibition will implement a real-name admission system. Please bring your ID card / passport / Hong Kong, Macao and Taiwan pass and the application code, please arrive at the exhibition hall half an hour in advance and wear a mask, keep a queue distance of more than one meter, and orderly admission.
★Please read the SEMICON China 2020 Notification of Epidemic Prevention and be sure to sign and seal the Commitment letter of responsibility for epidemic prevention and control of exhibitors (click to download) and send it to the following mailbox: [email protected]
If you do not sign and seal the Commitment letter of responsibility for epidemic prevention and control of exhibitors and send it bcak, the organizer have the right to refuse the exhibitors’ access to the exhibition area, and all consequences arising therefrom shall be borne by the exhibitors.
★Exhibitor real name certification is now online. Please register in the Online Exhibitor Service Center.
The exhibition will implement a real-name admission system. Please bring your ID card / passport / Hong Kong, Macao and Taiwan pass and the application code, please arrive at the exhibition hall half an hour in advance and wear a mask, keep a queue distance of more than one meter, and orderly admission. ★Transportation Vehicles
“Parking Permit” and “Queueing Number” must be obtained before driving vehicles into the loading areas to load and unload the goods. Security staffs are authorized to stop those who fail to follow the guidance from entering. For detail information, you can refer to “Queueing Number & Parking Permit Notice”.
★SNIEC will send staffs to booths to ensure booth facilities are completely and properly installed. After inspection, SNIEC will provide the power normally by 12:00pm, June 26, 2020. For special cases, applications for early power supply, please contact MEGA EXPO or refer to Form 5 (Electrical Setting) for details.
★Exhibitor who contracted Raw Space in FPD China 2020 are subjected to a Hall Management Fee (RMB 22/sqm) per rules published by SNIEC. All raw space exhibitors are required to pay the Hall Management Fee to official contractor. MEGA EXPO before May 22, 2020. MEGA EXPO will transit it to SNIEC.
★The maximum height for E1-E7 raw space stand structure is 4.4 meters.
★FPD China 2020 Safety Measurament
-All raw space exhibitor's contractor must submit the contractor's license. The electrician must has the electrician certificate and the copied documents should be the same as the electrician operating on the show site
-All raw space exhibitors must assign a full-time employee to be the safety construction manager to coordinate safety construction and monitor the entire working process. Please finish and return the Form 3 (Safety Construction Manager Registration Form).
-Exhibitors who rent raw space can appoint their own contractors to set up the booth. Please ensure you and your contractor read and observe all the rules & regulations in the 《Safety Construction Guideline》. For details please refer to EAC Inspection & Move-in Process or Section 5 in Exhibitor Service Manual.
|
|
| > |
Exhibitor Services Manual |
| |
The manual will provide you with everything you need for a successful exhibition. Please take time to download and read through it, ensuring that the necessary actions are taken and the service forms are returned as required by their respective deadlines. |
| > |
FPD China 2020 FLOORPLAN |
| |
We encourage you to bookmark the FLOORPLAN so you can view it conveniently throughout the show cycle. |
|
Exhibitor Password
Your Company name is: [[CompanyName]]
Your Password is: [[Password]]
Use your password to:
-Log-in the Online Exhibitor Administrative Site to submit your company profile and products information. The earlier you submit your information, the more exposure opportunities you will have to the potential clients.
-Log-in the Online Exhibitor Service Center to register your company's Exhibiting Personnel.
The system will be closed on Jun. 12th, please finish your submiting before the deadline.
Exhibition Dates and Times
Move-in Dates&Times:
For Raw Space:
Thursday, June 25 10:00 – 22:00
Friday, June 26 09:00 – 22:00
For Decorated Space:
Friday, June 26 09:00 – 22:00
Show Dates&Times:
Saturday, June 27 09:00 – 17:00
Sunday, June 28 09:00 – 17:00
Monday, June 29 09:00 – 16:00
Move-out Dates and Times:
Monday, June 29 17:00 – 24:00
The move-in/move out schedule are subject to change which will be sent through move-in notice.
Exhibitor Badge Pick-up
Please pick up the exhibitor badges of your company at the following time:
Wednesday, June 24 10:00 - 16:00 (only available for pick up but not supplementary)
Thursday, June 25 10:00 - 18:00
Friday, June 26 10:00 - 18:00
your sub-branch and your co-exhibitors at the Exhibitor Registration Counter in the North Lobby（No.2 entrance lobby）of SNIEC with your business card. Should you need to add or revise your badges, you can process it onsite.
Exhibit Prepration
About the exhibit prepration of E1-E7, please read SEMICON/FPD China 2020 Move-in/Move-out Notice. Please read Exhibitors Notice, SEMI China committee never recommend or appoint any company as appointed contractor for raw space. Please improve your safety awareness and keep yourself away from false information.
Floor manager
During move-in and move-out，in case of the following questions about construction，on-site equipments rental(Furniture，Lighting，Socket，Electrical，Water，Compressed Air etc.)，over time working，please contact with floor manager of each hall.
Hall E1：Lucas Lu--185 0165 0613
Hall E2：Polly Liu--185 0165 0625
Hall E3：Crown Lv--185 0165 0622
Hall E4：Garry Guo--137 6468 9650
Hall E5：Zhe Wang--156 1895 7256
Hall E6：Lin Ge--156 185 1636 6896
Hall E7：Zezhen Lee--185 1610 4548
Back Wall Construction Guideline for Raw Booth
All raw booths, except island configurations, must provide a full back wall, minimum of 2.4 meters (8”) in height. All exposed walls must be finished on all sides at the expense of the exhibitor who owns the walls. All exposed wall areas or exposed structures must be covered by white PVC cloth without any break, contamination, graphics or texts. If the back wall did not meet the above requirements, penalty will be deducted from the construction deposit.
Exhibitor Update in previous months
Octorber Issue November Issue December Issue January Issue
April Issue June Issue
|
